TIP
Your programmer is not set up to make phone
calls or access the internet. It’s designed for
therapy management only.
CHARGE UP
A cord has been provided to keep your programmer and communica-
tor charged. The battery indicator at the top of the screen will show
you how much battery life remains. Use the same cord to charge your
communicator after charging your smart programmer.
It is important to keep your communicator charged. If the battery
is running low, the battery light will turn yellow. To charge the
communicator, simply connect it to the charger cord. To conserve
battery life, turn the communicator off in between uses.
Note: The communicator can’t be used while it is charging. If the
communicator battery level is at 0%, you will need to charge it for
5 minutes before it’s ready to communicate.
A separate cord has been provided for your recharger dock. Use this
cord to keep your recharger charged. Simply store the recharger in the
dock to keep it charged.
POWER ON
To turn your programmer on, press and hold the
power button
. To
unlock, swipe the
blue Medtronic screen
in either direction.
When you are finished using the app, press the
power button
to put
the programmer to sleep.
To turn the communicator on, press the
power button
. To turn it off,
hold the
power button
down until all the lights are off.
Turning the programmer and communicator on or off will not impact
your therapy.
USING YOUR
INTERSTIM
™
SYSTEM
16
17
YOUR INTERSTIM SYSTEM