MedRx AVANT REM (Real Ear Measurement) Installation Manual
Effective Date: 05-25-2017
10
Live Speech Mapping
Step-by-Step Guide to Live Speech Mapping
Ensure the Audiogram is Entered
Before making Live Speech Mapping measurements, the patient’s pure tone audiogram must
be available to the software. This can occur several ways:
1.
The audiogram was automatically entered by MedRx AVANT Audiometer software
when testing. Then saving the NOAH session.
2.
The audiogram was manually entered into the NOAHaud 3 or Noah 4 software and
saved.
3.
The audiogram was entered using another manufacturer’s audiogram module.
If none of these have occurred, you may manually enter the audiometric data into the AVANT
REM software as follows:
1.
Launch the audiometric module by
Clicking on the
Audio
button on the
right side of the AVANT REM main
window.
2.
Using your mouse, select the test ear.
3.
Select the test type
Air.
4.
Enter thresholds by Clicking the
intersection points with the mouse.
(You may also enter the audiogram by
selecting the audio tab in either the
LSM or HLS/MHA screens).
5.
Repeat for UCL (Bone and MCL
optional).
6.
Repeat steps 3-5 for the other ear.
After the audiogram is entered, Click the
Back
button to return to the AVANT REM Main
screen.
1.
From the AVANT REM Main screen, Click LSM.
2.
In the next Window. Click LSM again.
The Operator Headphone is used by the operator to monitor the signal being received by the
probe microphone.
