ARC-I-MARCI-2 MedRx AVANT ARC Installation Manual
5
Effective Date: 10-21-2016
Notice!
The Red & Blue adapters are included and must be removed to attach 18 gage (1.0mm) Free Field
speaker wires and then reinstalled. DC Power supply must be used when using passive Free Field speakers.
To Install Free Field Speaker Wires:
Unplug both the Red & Blue connectors.
Place a small flat head screw driver on the small orange tabs
and push down while inserting a wire into the opening then
remove the screw driver. Be sure the wire is secure.
Repeat until all the speaker wires are secured then plug both
connectors into the device.
Use passive speakers with 4 ohm impedance when using the internal speaker amplifier.
Transducers and Accessories
IP30 Insert Earphones
(Standard)
Supra-Aural Headphones
Optional
Bone Conductor
Talkback Microphone
Patient Response Switch
Operator Mic &Monitor
(may vary)
USB Cable
Speaker
Client Headset
Power Supply
3A Insert Earphones
(Optional)
Probe Microphones
Use the accessories provided with your Avant ARC. Use of un-approved accessories is not recommended.
Screw
Driver
Screw
Driver
