FOR
BLEACH WIPES
9
5.0 TROUBLESHOOTING
Problem
Probable Cause
Solution
1. No response when pressing
Dispense Wipe Button on Lid.
Cartridge not properly inserted into or
not making contact with Lid.
Remove Cartridge from Lid. Ensure Pogo Pins on Lid
and Battery Contacts are clean and re-insert fully into
Lid.
Lid not properly closed.
Ensure Lid is completely closed with the 2 Lid Latch-
es (1 on each side of the Lid) engaged.
Lid Closing Switch is not working
properly.
Open Lid and ensure the Lid Closing Switch is not
damaged and can be depressed and spring back
freely.
Battery power low.
Replace batteries in Battery Compartment (6 AA
batteries required) or utilize new Cartridge.
2. Pressing Dispense Wipe
Button runs motor but not
dispensing wipe.
No wipe in the canister.
Replace with new Canister.
Wipe is not engaging with Rollers.
Open Lid and ensure wipe is placed on top of the
Bottom Roller with 1-2 inch lead.
3. Pressing Dispense Wipe But-
ton feeds out wipes but
not dispensing any Highlight
onto wipe.
No Highlight in the Cartridge.
Replace with new Cartridge.
Cartridge is not installed correctly.
Remove Cartridge from Lid and re-insert.
Lid Closing
Switch
Bottom Roller
Dispense Wipe
Button
Door Sensor
(blue)
Lid Latch
Lid
Latch
