20
Maintenance and Field Adjustment
Battery Replacement
The SolarBee contains an onboard battery
and electronic controller inside the Low Profile
Stand that will require infrequent replacement.
Between 2 and 3 replacments are expected
over the course of the machine life.
Battery Replacement
NO TOOLS REQUIRED:
STEP 1: Open the low profile stand door and
located the electronic controller.
STEP 2: Locate the On/Off switch and turn the
switch to the "OFF" position.
STEP 3: With the SolarBee off, unscrew the
battery lead from the battery terminal.
STEP 4: Slide the battery out of the front of the
Low Profile Stand.
IMPORTANT NOTE:
The battery weighs approximately 140lbs
and may require two people to handle.
STEP 5: Install new battery into position and
connect battery lead back up to the battery
terminal.
STEP 7: Turn the On/Off switch back to the
"ON" position.
STEP 8: Be sure the SolarBee is operating
correctly and close the controller door.
Battery Disposal: Be sure to follow local
laws and regulations when disposing of the
used up battery!
Low Profile Stand
Battery and Electronic Controller Inside
Battery
Electronic
Controller
