Medline MDS1001U, Operation Manual, Page: 20 / 75

-20-
Troubleshooting
PROBLEM RECOMMENDED METHOD
No display
No
measurement
occurs
Blood pressure
readings are too
high or too low
Blood
pressure
reading
are
variable
Make sure that the batteries are installed in the proper direction.
(Polarity matches to the indication in the battery case.)
Check that the cuff is positioned properly and review the
measurement procedure again.
Check if the arm is positioned properly. Position your arm
on a table so that the cuff is at the same level as your heart.
Remain seated during the entire measurement. Refrain from
moving your body or talking during the measurement.
Wait 5 to 10 minutes between measurements.