Medline evencare g2, User Manual

Page: 12 / 107

12
Understanding Your New Blood Glucose System
EvenCareG2
The EvenCareG2 Blood Glucose Test Strip
The EvenCare G2 Test Strips are glucose specific, biosensor-based
test strips that require very little blood sample to quickly test glucose in
fresh capillary whole blood. The test results are plasma-calibrated for easy
comparison to lab results, however results may be 10% to 15% higher
than results obtained from whole-blood referenced blood glucose assays.
The test strip is also equipped with under-fill detection to alert you when
there is not enough blood to perform a test, so you can be assured that
every reading you get is an accurate and meaningful result.
IMPORTANT:
• Immediately close the vial cap of the test strip bottle tightly after
each use. Keep the unused test strips in the original bottle.
• DO NOT leave any test strips outside the bottle while not in use.
• DO NOT reuse test strips.Test strips are for single use only.
• Carefully discard used test strips and lancets in proper
waste containers.
Contact Points
Insert this end into the test strip
port on the top of the meter.
Sampling End
Apply blood or control
solution here.