6 MEDLINE
| PIC_00303 (Rev. 11-13-2019)
Step 4: Attach feet leg extensions (D) to leg mainframes (C).
Depress the push-buttons on the mainframe and place feet leg extensions (D) over
leg mainframe (C) until secured at desired height. Repeat with three remaining legs.
Make sure all four extension legs are installed at the same height. Also, make sure
push-buttons are fully protruded before using.
PART TWO: Apply armrest and Backrest support bars
(for MDS89745ELMBC only)
Step 1: Attach the armrest support bars (E).
Keep the bench/chair flipped over so the assembled legs are facing upwards. Take
the armrest support handle (E) and insert longer tube portion into support frames as
pictured above. Depress the push-button on the armrest support bar (E) to lock into
place. Make sure the push-button is fully protruded before using. Repeat this step
with the remaining three armrest support bars (E).
Step 2: Attach backrest extension bars (I) to the backrest support bar (H)
(for
MDS89745ELMBC
only).
Next take one of the backrest extension bars (I) and insert the tube into the backrest
support bar (H) which was already screwed into the underside of the seat in Part
one: Step 3. Make sure the push-button is fully protruded before using.
Repeat this step with other backrest extension bar (I).
PART THREE: Apply Armrest Handles (F) and
Backrest (G) (MDS89745ELMBC only)
STEP 1
STEP 1
STEP 2
STEP 3
STEP 2
STEP 1 Continued
STEP 3 Continued
