MediVena AC500 PRO, Operations & Procedures Manual

Page: 26 / 36

DISPLAY MESSAGES
Display Description Action
The system is ready to accept a
control solution sample.
You may now apply a drop of control
solution sample.
Test result is higher than 600 mg/dL
(33.3 mmol/L).
Repeat the test using a new test strip. If
the result is still HI, consult your physician
immediately.
The system is ready to accept a
blood sample.
You may now apply a blood sample.
appears when the result is
HIGHER than the “HI alarm setting”
reference range.
For your reference, or you can change the
default setting value 180 mg/dL according
to page 19.
For your reference, or you can change the
default setting value 70 mg/dL according
to page 19.
appears when the result is
LOWER than the “LO alarm setting”
reference range.
Test result is lower than 20 mg/dL
(1.1 mmol/L).
Repeat the test using a new test strip. If
the result is still Low, consult your physi-
cian immediately.
Temperature is too high to perform
the test.
Repeat the test in a cooler setting (50 -
104˚F or 10 - 40˚C). Wait 15 minutes before
re-testing.
Temperature is too low to perform
the test.
Repeat the test in a warmer setting (50 -
104˚F or 10 - 40˚C). Wait 15 minutes before
re-testing.
An error message indicating a
problem with the
test strip.
Review the instructions and try again with
a new test strip.
Temperature is high during the test
procedure.
Large variation may occur between results
due to high or low temperature. Move to
the environment (50 - 104˚F or 10 - 40˚C)
and wait 15 minutes before re-testing.
Temperature is low during the test
procedure.
Large variation may occur between results
due to high or low temperature. Move to
the environment (50 - 104˚F or 10 - 40˚C)
and wait 15 minutes before re-testing.
25