TRANSFER TEST RESULTS TO A COMPUTER
You can use your meter with ONE-CARE® Link Health Management Software to transfer test results to
your personal computer.
1.
Obtain the required software and cable
For order information please call Customer Service or visit website of www.one-care.com
2.
Install the software on a computer
Follow the instructions provided with software to install the software.
3.
Get ready to transfer test results
With meter turned off, connect the interface cable to a serial port on your computer,
then connect the other end of interface cable to the data port located on the side of the meter.
The word "PC" will appear on the display, indicating that the meter is in the communication mode.
4.
Transfer data
Follow the instructions provided in the software to download the results from the meter. After
finishing the data transfer, press
M
button to turn off the meter.
Note:
While in the communication mode, you will be unable to perform a blood glucose test. If the
meter is not in the PC link mode, it will not respond to computer commands.
22
Summary of Contents for AC500 PRO
Page 34: ...Notes...
Page 35: ...Notes...
