28
Filter Freq
[50Hz/35Hz]/[50Hz/25Hz]
/[60Hz/25Hz]/[60Hz/35Hz]
Set up the parameter compoundings of AC Filter and EMG
Filter.
Language
[English]/[Chinese]etc
Set up the language displayed.
Hospital
Fill in it yourself.
Fill the hospital name in it.
K-B Sound On/Off
Select to activate key-press sound, and not select to dumb
it.
Demo Mode On/Off
Select to make the system operate in demo mode, or in
sampling mode.
13.9 Sampling Settings
Select
in the main interface, the sampling setting dialogue box will pop up shown below.
Here, select the button
【
Default
】
, the sampling settings will go back to the default.
Each item, its options and explanation are shown in the table below.
Item
Options
Explanation
AC Filter
[ON]/[OFF]
Set up whether to use AC Filter or not.
EMG Filter
[ON]/[OFF]
Set up whether to use EMG Filter or not.
DFT Filter
[ON]/[OFF]
Set up whether to use DFT Filter or not.
Info Input
[Before]/[After]/[None]
Set up when to input case information.
Show Style
[3 leads]/[6 leads]/[12 leads]
Set up the ECG display mode in screen.
Show Gain
[2.5mm/mV]/[5mm/mV]/[10mm/mV]/
[20mm/mV]/[40mm/mV]
Set up the ECG gain in screen.
Show Speed
[5mm/s]/[6.25mm/s]/[10mm/s]/
[12.5mm/s]/[25mm/s]/[50mm/s]
Set up ECG sweep speed in screen, but
when printing in auto and rhythm mode , it
does
not
support
5mm/s,
10mm/s,
12.5mm/s.
13.10 Analysis parameter settings
Select
in the main interface, the analysis parameter settings dialogue box will pop up shown
