Meditech C-Scan, User Manual

Page: 19 / 89

8
temperature and inspection mode. To avoid burns, do not expose the
probe to the same part of the patient's body for extended periods of time.
In the conditions to meet the diagnosis, try to shorten the inspection time.

Diagnostic scan is not allowed during device charging.

Any accessories (such as couplers) used in conjunction with the system
must meet the appropriate industry standards and be approved for listing.
1.6
Operator safety
Operator requirements
Only qualified doctors, medical personnel familiar with ultrasound technology or sound
spectrum tester may perform the scanning for the patient, unauthorized personnel shall not
indiscriminately use the device.
Improper operation of this system may result in the risk of injury to the operator. Only
the qualified personnel of our company will be allowed to unpack the equipment and
perform the initial system installation. Do not attempt to install the unit yourself.

Risk of electric shock. Do not attempt to disassemble the system yourself.
Repairs and internal adjustments may only be made by qualified
personnel of our company.

Before cleaning equipment, one should shut down the system to prevent
electrical leakage.

To avoid the operator's hand, wrist or arm fatigue, please note the
following：
1) Keep the body in a balanced position during the scanning
operation.