TREADMILLS MOD. 870A/870S/870C
Rev.1/01.07.2019
© Medisoft RAM Italia S.r.l.. All rights reserved.
20
To adjust the treadmill’s support feet, it is necessary to raise the rubber
protecting the feet and to use two 19 mm wrenches.
3.3.1 HANDRAILS MOUNTING
Eventually, to put the treadmill in a
horizontal position, you can adjust the
height of the back support feet of the
treadmill.
To adjust the treadmill’s support feet,
it is necessary to raise the rubber
protecting the feet and to use two 19
mm wrenches.
Once the treadmill body is positioned
correctly, two people should lift the
front handrail and position it at the
front of the treadmill as indicated in fig.
1.
Before executing this operation you
must unthread and put away the two
screws at the base of the front
handrail.
While one person holds the handrail in
place, a second person should fix its
end approximately 2 cm into the
support on the left side.
On the right side of the handrail, there
is a plug to be connected to the right
side rail-support.
Rotate the ring nut of the plug in a
clockwise direction to ensure a proper
connection.
WARNING:
This ring nut must be completely
rotated up to the end position in
order to ensure the connection of
all the pins of the plug.
Apply moderate pressure on both sides
of the front handrail equally to complete
insertion.
Fig. 1
Fig. 2
