TREADMILLS MOD. 870A/870S/870C
Rev.1/01.07.2019
© Medisoft RAM Italia S.r.l.. All rights reserved.
18
3
Installation
3.1
INSPECTION .
The treadmill is delivered to the customer in its original carton, and is securely
fixed to a wooden pallet by means of plastic strips. The carton is fixed to the
wooden pallet with nails.
A forklift must be used to lift the pallet with the treadmill. Always lift the pallet
from the bottom; arrows on the carton indicate the correct position of the forklift.
If a forklift is not available, four people are required to lift the treadmill with its
wooden pallet.
WARNING !
When opening the carton, it is necessary to wear protective gloves to
avoid injury.
1. Remove all the nails from the wooden pallet using a proper pincer.
2. Ensure you remove them all to avoid injury.
3. Lift the carton from the wooden pallet. This will require more than one
person.
4. If it is likely that you will want to move the treadmill a significant distance at a
later date, ensure that the carton is carefully folded and stored for this
purpose. If not, dispose of it properly.
5. Cut the three plastic strips attaching the treadmill to the wooden pallet with
scissors.
WARNING !
Do not leave the packaging within reach of children. Dispose of it
according to current regulations governing waste disposal.
3.2
CONFIGURATION
The treadmill configuration is composed by a 800 series device (mod. 870 A,
870 S or 870 C), a RS 232 serial cable and a technical CD.
Verify the presence of the following material, inside the box of the standard
accessories :
1
RS232 cable (no. 1)
2
CD ROM containing Tap_Tst program, user and service manual
