Medisana MC 825, Instruction Manual

Page: 26 / 110

18
3 Operating
GB
down to the base of the backrest. Once the heads reach this point, the direction of rotation is reversed
again and then travel up the back again.
Upper Back button

(upper back)
The Shiatsu massage heads

travel up and down the upper half of the back in a circular motion. The
reversal of the direction of rotation takes place when the respective end positions are reached.
Lower Back button

(lower back)
The Shiatsu massage heads

travel up and down the lower half of the back in a circular motion. The
reversal of the direction of rotation takes place when the respective end positions are reached.
BACK HEAT button

The heat function can be activated at any time with the shiatsu massage, during which the akupressur
Massage can also be activated. Press the BACK HEAT button

to activate the function; the LED on
the control unit and the massage heads light up red. The heat is radiated through the massage heads

. Press the button

again or stop the Shiatsu massage, to de-activate the heat function; the LED
and the red light of the massage heads go out.
AIR BACK button

/ AIR SEAT button

(acupressure buttons)
An acupressure massage in the waist and thigh area can be added to the Shiatsu massage function at
any time by pressing buttons

/

.
The acupressure massage can also be used separately.
Switch on the device by pressing ON/OFF button

.
Press the button for the acupressure massage

/

. The Intensity LED lights up and both air cushions

/

inflate. They begin with a gentle massage. Pressing the Intensity button

increases the intensity
of the massage (medium intensity massage). The LED M lights up. Pressing the Intensity button

again
activates the strongest massage setting (highest intensity massage). The LED H lights up. Once button

/

is pressed the acupressure massage switches off and the LED goes out.
Do not use the massage device for longer than 15 minutes and then allow it
to cool. Using the device for longer can overstimulate the muscles and cause
tension instead of relaxation.
The massage can be finished at any time by pressing the ON/OFF

button.
After each use, switch the device off using the ON/OFF button

and remove
the plug

from the mains socket. Always store control unit in its bag

.
3.1 To switch off the device
Press the
ON/OFF button

. The
power LED begins
to flash and the massage heads travel back
down to the “Park” position. When this position is reached, the LED extinguishes. If you press the
ON/OFF button

while one of the massage functions is switched on, the massages in neck/
shoulder, waist and seat just stop immediately, including heat function. First the massage heads in the
back travel downwards to the “Park” position. The LED flashes meanwhile and then extinguishes.