Medisana MC 820, Manual

Page: 37 / 146

23
GB
3 Operating
Vibration button i
You can enhance the shiatsu massage at any time with a vibration mas-
sage for your thighs by pressing the vibration massage button .
i
The vibration massage in the upper thigh area can be operated separate-
ly. Switch on the device by pressing On/Off button .
i
Press vibration massage button . The LED located below left illumi-
nates and both vibration massage motors are switched on. They begin
with a gentle massage. Press button again and the vibration level in-
creases (medium intensity massage). The LED located in the middle be-
low illuminates. Press button a third time and the vibration level in-
creases (highest intensity massage). The LED located below right illumi-
nates. After button is pressed a fourth time, the vibration massage is
switched off and the LED extinguishes.
p
p
9
p
5
p
p
p
Do not use the massage device for longer than 15 minutes and
then allow it to cool. Using the device for longer can overstimulate
the muscles and cause tension instead of relaxation.
The massage can be finished at any time by pressing the
On/Off button .
After each use, switch the device off using the On/Off button
and remove the plug from the mains socket. Always store
control unit in its bag .
9
9
4
7 6
To switch off the device i
Press the On/Off button . The power LED begins to flash and the
massage heads travel back down to the “Park” position. When this po-
sition is reached, the LED extinguishes. If you press the On/Off button
while one of the massage functions is switched on, the massages in
neck/shoulder and seat just stop immediately, including heat function.
First the massage heads in the back travel downwards to the “Park”
position. Meanwhile the LED flashes and then extinguishes.
9
9