Medisana 48614, Manual

Page: 25 / 42

The MEDISANA NCT infrared thermometer can store up to 30
results. You can call up your stored data with a short press of the
START button , without having previously switched on the
thermometer with the ON/OFF button . The symbol M will
flash on the display next to “ - - - “. After a further short press of the
START button , memory slot number 1 will appear in the unlit
display, followed directly by the last stored temperature reading.
The symbol
M will flash below the unit of measurement. With a
further press of the START button , you can call up the result
stored in memory slot “ 2 ”. A total of 30 memory slots are available,
and these will be displayed in order if you continue to press the
START button . If a memory slot is empty, the symbol “ - - - “
will appear next to it in the display. G
3.5 Recalling stored data





3 Operation
GB
21
3.6 Error messages
Description
The measured temperature is too high.
H appears in the display if the reading is
above 42.2°C / 108°F (body mode) or
100°C / 212°F (object mode).
The measured temperature is too low.
L appears in the display if the reading is
below 34°C / 93,2°F (body mode) or 0°C /
32°F (object mode).
The ambient temperature is too high.
The ambient temperature is above 40°C /
104°F (body and object mode).
The ambient temperature is too low.
The ambient temperature is below: 16°C /
60,8°F (body mode) or 5°C / 41°F (object
mode).
Error indication in the display.
A malfunction has occurred.You hear 3
short beeps.
Display