![background image](http://html1.mh-extra.com/html/medisana/270103/270103_instruction-manual_1762162024.webp)
16
2 Operation
GB
2.
If you press the
Snooze
button
within 30 minutes after the
setting time, the alarm time will be extended for 5 minutes. Each
further press of the
Snooze
button
extends the wake up func-
tion for a further 5 minutes. You can extend the alarm time for up
to a maximum of 30 minutes.
If an alarm is activated, you can press the
Off
button
to switch off the
alarm function. The settings of the alarm function are kept for the next
day. If you do not press the
Off
button
e.g. if you wake up before
the alarm time and forget to press the
Off
button
the alarm function
is turned off automatically after about 30 minutes.
Hint:
You can also use the
Off
button
to switch off the light, radio and
sound functions.
If you are taking a short break or want to take a little nap, you can set
a short-time alarm.
1.
Press the
Zizz
button
and the Zizz icon appears on the display
.
2.
Pressing the
Zizz
button
once sets an alarm to go off in 15
minutes.
3.
Every time you press the button, the time until the alarm goes off is
extended by 15 minutes.
4.
The maximum alarm time that can be set for a short-time alarm is
90 minutes.
5.
If you do not press the
Zizz
button
for 3 seconds, the set Zizz
function is activated. In the Zizz function, the settings for the alarm
sound and brightness are preset. See “
Setting the alarms
” (page
13-14) for information on setting the alarms.
If you press the
Dimmer
button
, the display illumination switches on
and changes each time you press the
Dimmer
button
again from
bright (green) to dim (green), bright (orange) to dim (orange) and display
illumination to off.
1.
Press the
Light
button
to switch on the lamp
, the display
shows the
icon.
2.
The figures in the display (0 - 20) indicate the brightness increments.
At the same time, the brightness gradually increases from 0 to the
brightness previously set.
2.8
Switching off
the alarm
function
2.9
Activating
the ”Zizz”
temporary
alarm
2.10
Setting the
display
illumination
2.11
Switching and
adjusting the
brightness
270103_Tchibo_Lichtwecker2_5spr.qxd:Lichtwecker 09.08.2010 16:45 Uhr Seite 16