Medion Tevion 82010 Manual Download Page 5

Helpline No. UK/ North Ireland 0871 37 61 020  Rep. Ireland 1-800-992 508 
Web Support www.medion.co.uk 
Model Number: 82010 

7

 

 

 

 

Do not reverse the positive (+) and negative (-) terminals to avoid short-circuit. 

 

Do not mix used and new or different types of batteries together.  

 

Remove promptly the used batteries from the device. 

 

Remove the batteries from your device if it is not to be used for a longer 
period. The device could be damaged by leaking batteries. 

 

When the headphones are not in use, switch 

OFF

 the headphones to avoid 

damaging the batteries. 

 

Clean the battery and device contacts, if necessary, before inserting batteries. 

 

Replace all batteries with new batteries of the same type at the same time. 

Information about the Regulatory Compliance according 

to R&TTE 

The company declares that this device is in compliance with the essential 
requirements and other relevant provisions of Directive 1999/5/EC. Complete 
declarations of conformity are available under www.medion.com/conformity. 

Setting Up 

5

 

 

Read the Safety Information Chapter under all circumstances before 
bringing the device into operation. 

Unpacking 

1.

 

Open the box very carefully to prevent the equipment from being damaged. 
Damage can occur if a knife with a long blade is used to open the box. 

2.

 

There are various small parts in the packaging (batteries, screws, etc.). Keep 
these out of the reach of children. There is a risk of swallowing the parts.  

3.

 

Please keep the packaging material well and use it exclusively to transport the 
headphones. 

Connecting the transmitter 

1.

 

Insert the plug on the supplied AC/DC adaptor into the connecting jack on the 
device and insert the other end into an easily accessible 230 V ~ 50 Hz power 
socket.  

2.

 

Connect the red and white plug of the RCA audio cable to the red and white 
jack of the transmitter.  

3.

 

Connect the black plug (3.5 mm) with the audio output of the source.  
Use the adaptor plug if the audio output needs a 6.3 mm plug. 

The red Auto On indicator led will light up as soon as you have connected both 
the AC/DC adaptor to the mains outlet and the audio cable to a signal source.  

Summary of Contents for Tevion 82010









Reviews: