![Medion P62033 Instruction Manual Download Page 78](http://html1.mh-extra.com/html/medion/p62033/p62033_instruction-manual_1761323078.webp)
79 of 86
DE
EN
As soon as the mobile phone has found the radio, a corresponding message will
appear on the mobile phone (e.g.
NEW DEVICE FOUND
or similar).
The car radio will be shown on the mobile phone and you may by asked to enter
a password. Enter the password “0000” for your car radio
CAR KIT
shown on
the mobile phone.
The message “
LINKED
” will appear on the car radio and, when the mobile
phone has been recognised, the Bluetooth name of the mobile phone.
1
11.2. Connection
status
The Bluetooth symbol in the display indicates which connection status currently ex-
ists:
•
No Bluetooth symbol: no connection.
•
Bluetooth symbol: connection has been established;
If a connection has been established, incoming and outgoing calls will be trans-
ferred from the mobile phone to the car radio.
Establishing a connection
You can establish a connection by executing the corresponding function on the
mobile phone.
Breaking the connection
You can break the Bluetooth connection via the mobile phone.
If the devices have been switched off and then switched back on again, the car ra-
dio will automatically search for connected devices. This takes about 10–15 seconds.
Terminating/restoring the connection on the car radio
Hold down the
SCAN
button. The car radio will terminate the Bluetooth con-
nection.
Hold down the
SCAN
button again. The Bluetooth connection will be restored.
11.3. Telephone
calls
Make sure your mobile phone is switched on and place it near the car radio.
Select numbers
You can enter the telephone number via your mobile phone as normal.
Alternatively, you can enter the telephone number using the remote control, as fol-
lows:
Briefly press
.
PHONE
appears on the display.
Enter the telephone number using the remote control's numeric buttons.
If you have made a mistake, you can delete the numbers with the
T-MEN/TRAN
button.
1
In early Bluetooth models, e.g. mobile phones with Bluetooth protocol 1.0, the display may appear
diff erent to that described here. In some cases, the mobile phone’s ring tone may also not be trans-
ferred.
84003 DE EN eCommerce Content final REV4.indb 79
84003 DE EN eCommerce Content final REV4.indb 79
28.05.2015 09:09:22
28.05.2015 09:09:22
Summary of Contents for P62033
Page 86: ...06 2015...