DE
EN
ES
FR
NL
IT
15
7. Using the device for the fi rst time
7.1. Before connecting the monitor
It is possible that your existing monitor supports a physical resolution that is not
supported by your new monitor. In this case, the image on your new monitor may
not appear correctly after it has been connected.
To prevent this, select a a physical resolution that is supported by both of your
monitors. Set this physical resolution in your operating system before connect-
ing your new monitor.
A table listing the physical resolutions supported by this monitor can be found in
the section „Setting the screen resolution“ on page 19.
7.2. Mounting
Attach the monitor stand as shown in the illustration. Carry out these steps before
connecting up the monitor.
Place the device onto the stand. Ensure that the connecting piece fits into the
slots on the device and the stand clicks into place.
Use the supplied screws to screw the stand tightly to the device.
