Medion MP3 PLAYER Operating Instructions Manual Download Page 69 | Manualshive

Page: 69 / 80

background image

Appendix

63

Alternative Installation of the Navigation Software
from a Memory Card

The software for your navigation system can also be installed directly from a mem-
ory card.

The pre-installed software may have to be uninstalled beforehand (see special
CleanUp function, Page 55).

You will be requested to install the navigation software during the initial adjust-
ment. Please proceed as follows:

1.

Remove the memory card from the packaging carefully. Pay attention that
the contacts are not touched or soiled.

2.

Push the memory card into the SD-/MMC slot until it engages.

3.

Click on

OK

, in order to install the application.

The main screen, through which you will now be able to carry out the navigation
settings, will appear after all data has been copied to your navigation system.

Transferring Installation Files and Map Material to the
Internal Memory

Note

The navigation system must be connected to a computer by means
of ActiveSync

®

(see Page 58), for the transfer of the data.

Your device has an internal, permanent memory, which is located in the

\My Flash

Disk

directory.

You will be able to make this directory, and others, visible with ActiveSync

®

, by

means of the

Search

option. Directories and files can be manipulated as in Win-

dows Explorer.

The required directory must have been stored, in order to make the installation files
and the map material for the device available.

Deposit the

INSTALL

directory for the installation files at (\My Flash Disk\INSTALL).

Deposit the map material in the

MapRegions

directory (\My Flash

Disk\MapRegions). Please pay attention to the modes of lettering given above
when naming the directories.

Pay attention to the fact that sufficient drive capacity must be available, if you have
stored additional data on your navigation device. Remove files not needed if suffi-
cient drive capacity is not available.

«
...
67
68
69
70
71
...
»

Summary of Contents for MP3 PLAYER

















































































Reviews:

No comments

Related manuals for MP3 PLAYER

ITC237-PW1A-IRZ

Brand: Dahua Pages: 20

Steadycam Cam-Flo-Pod

Brand: walimex Pages: 7

Brand: RCA Pages: 80

Brand: Sony Pages: 2

DS-2CC102 P(N)-IR5

Brand: HIKVISION Pages: 6

Brand: Sony Pages: 2

Brand: Jazz Pages: 16

Brand: Jazz Pages: 21

Brand: Jazz Pages: 29

Brand: Jazz Pages: 59

DS-2CD892P (N) - IR5

Brand: HIKVISION Pages: 7

SPRUCE VM-2370CF

Brand: Axler Pages: 8

Brand: Viofo Pages: 16

Brand: iClick Pages: 38

AGDVX100 - DV CAMCORDER

Brand: Panasonic Pages: 12

Brand: Canon Pages: 190

Brand: Samsung Pages: 62

Brand: Samsung Pages: 127

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands