Medion MP3 PLAYER Operating Instructions Manual Download Page 60

Page: 60 / 80

English

Customer Service

Faults and Possible Causes

The navigation system no longer reacts or is behaving atypically.

•

Carry out a reset (see page 22).

The navigation system is recognized only as a guest by ActiveSync

•

See information on page 58.

The GPS receiver cannot be initialized or found.

If a GPS signal continues not to be reported on the screen, in spite of the correct
installation of the system, this can be caused by the following factors:

•

Sufficient satellite reception is not possible.

Solution

Change the position of your navigation system and ensure that unre-
stricted “sight” of the aerial is not impaired.

No language statements can be heard.

•

Check the volume setting.

Additional Support

If the suggestions in the above section have not solved your problem, please con-
tact our customer service hotline.

However, before you contact your Technology Center, please have the following
information available:

•

What messages, if any, appear on your screen?

•

What software were you using when the error occurred?

•

What steps have you already undertaken to solve the
problem?

•

Have you upgraded or removed drivers or hardware?

•

Can you manually repeat the problem?

•

If you have been given a customer number previously, please give this
number to the technician.

Summary of Contents for MP3 PLAYER

















































































Search results

Summary of Contents for MP3 PLAYER

Reviews:

Related manuals for MP3 PLAYER

Brands by name

Popular brands

Medion MP3 PLAYER, Operating Instructions Manual

Search results

Summary of Contents for MP3 PLAYER

Reviews:

Related manuals for MP3 PLAYER

Brands by name

Popular brands