11
EN
3.2.
Mounting
Attach the stand as shown in the illustration. Carry out this step before connecting
the LCD TV.
4 x ST4 x 12 (MD 31282 / MD 31283)
4 x ST4 x 16 (MD 31284 / MD 31285)
3.3. Inserting the batteries in the remote control
Remove the battery compartment cover on the back of the remote control.
Insert two LR03 (AAA) 1.5 V batteries in the battery compartment of the remote
control. Check the battery polarity (see label on the bottom of the battery com-
partment).
Close the battery compartment.
PLEASE NOTE!
Risk of damage!
The remote control can be damaged by leaking batter-
ies if not used for a long period of time!
Remove the batteries from the remote control if the
device is not going to be used for a long period.
3.4. Connecting the antenna
Your LCD TV supports different antenna signals. You can input the following image
signals to the television through the socket labelled
RF
:
•
Via analogue cable/an analogue house aerial
•
Via a DVB-T/DVB-T2
1
antenna or
•
Via a DVB-C
1
connection
Insert the antenna cable either from the house aerial/analogue cable connec-
tion, a DVB-T antenna or the DVB-C connection in the antenna socket on the LCD
TV.
This service must be available in your region
31282-5 ML eCom 30031243_5_7_9 QSG Final.indb 11
31282-5 ML eCom 30031243_5_7_9 QSG Final.indb 11
29.01.2021 09:07:37
29.01.2021 09:07:37
