22 of 78
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
If the WPS LED flashes, there has been an error
during connection. Wait two minutes until the LED
goes out and restart the connection process.
After the connection has been completely set
up, the signal LED will indicate the quality of the
connection.
To make further settings after the successful
establishment of a WPS connection or to set up the
WPS connection manually after a failed connection
attempt, use the web interface (see page 44).
7.1.3. Manual installation as repeater via
the web interface
WiFi Range Extender basic settings in
repeater mode
•
Before the WiFi Range Extender is configured via
the web interface, DHCP for wireless and LAN is
activated.
•
The SSID is set to “repeater” and no encryption is set.
•
After the WiFi Range Extender has been set up via
the Quick Setup menu and connected to the home
router, the WiFi Range Extender restarts.
•
Following the restart, DHCP is deactivated on the
WiFi Range Extender. The WiFi Range Extender now
receives the IP addresses from the router and passes
86977 EN ALDI AUS Content Final 50045465_REV2.indd 22
86977 EN ALDI AUS Content Final 50045465_REV2.indd 22
12.07.2013 10:14:11
12.07.2013 10:14:11
