Portable DVD-Player MD 80146
23
K
EY
FUNCTIONS
Switch-on
`
Connect the DVD recorder to the power supply.
`
Set the
INPUT OUTPUT
slide switch to the
OUTPUT
position.
`
Set the
POWER
slide switch to the
ON
position.
The standby LED lights up green. The machine is in
standby mode
L o a d i n g
is displayed on the screen.
The device then tries to read the disk.
- If no disk has been inserted
N o D i s c
appears.
If a disk has been inserted that cannot be played
because of the format
W r o n g D i s c
is displayed.
- If a disk has been inserted a symbol indicates this.
Standby/Switching off
`
Set the
POWER
slide switch to the
OFF
position to
switch the device to standby mode. The display
disappears and the standby LED lights up red.
The player is connected to the power supply even
when in standby mode. To switch the device off
completely, pull out the mains plug or remove
the battery.
Colour system
Using the
P/N
key you can switch between the PAL and
NTSC colour systems and the AUTO setting.
You can only change the colour system when the
DVD player is in stop mode or if there is no disk in
the disk compartment. We recommend the AUTO
setting
`
Press the
P/N
key if necessary several times to select a
colour system.
The colour system is displayed on the screen and
immediately transferred for the screen display.
The adjoining icon is displayed on the screen if a function is not possible
or not available in the current mode.
DVD_Porty_MD80146.book Seite 23 Dienstag, 12. Oktober 2004 11:44 11
