![Medion MD 44100 User Manual Download Page 293](http://html.mh-extra.com/html/medion/md-44100/md-44100_user-manual_1761833293.webp)
294
11. Network confi guration
There are two possible network configurations for the internet radio: WLAN mode
(wireless) or LAN mode (using an Ethernet cable).
•
If the internet connection has been established using an Ethernet cable, select
connection type
KABEL
in the set-up wizard. You can manually amend all set-
tings under system settings at a later point in time.
•
If you are on a wireless 802.11 a/b/g/n network, you can connect the internet ra-
dio to the internet via WLAN.
When using the device for the first time, you must select an Access Point (AP)
and enter the network key, if applicable. Thereafter the radio will always connect
to this AP automatically. If the AP can no longer be found, a message appears ac-
cordingly.
11.1. Accessing the web interface on the internet radio
When you enter the IP address of the internet radio in your browser, the
web interface of the internet radio is displayed.
•
You can find the current IP address under
SYSTEMEINSTELLUNGEN
/
INTER-
NETEINST
./
EINSTELLUNGEN ANZEIGEN
.
•
Here, you can give your internet radio a friendly name (by default it is [MEDI-
ON]+[MAC address]).
12. Connecting to a power supply
Connect the power supply plug on the supplied mains adapter to the
~AC IN
socket on the device.
13. Using the device for the fi rst time
When using the device for the first time, the language selection dialogue is dis-
played first.
Select a language for the internet radio menu and press
SELECT
on the remote
control to confirm your selection.
A data protection notice is then displayed.
Press
SELECT
on the remote control to accept the data protection provisions.
After this, the set-up wizard starts.
Confirm the prompt
EINRICHTUNGSASS. JETZT AUSFÜHREN?
by press-
ing
JA
to start the set-up wizard.
Select the display language for the menus and press
SELECT
to confirm.
The set-up wizard is displayed (in the previously set language):
If you select
NEIN
you can select in the next window whether the wiz-
ard is to start the next time the device is switched on.
44100 ML DirectSales Content 5006 5683 Final Rev2.indb 294
44100 ML DirectSales Content 5006 5683 Final Rev2.indb 294
09.10.2020 11:12:21
09.10.2020 11:12:21
Summary of Contents for MD 44100
Page 326: ......