MD 4295 Autoradio BDA_GB 06.12.2002 12:27 Uhr Seite 8
C
M
Y
CM
MY
CY CMY
K
RADIO
• Selecting the frequency range
Press the LOU/BND button (13) to change between VHF (F1, F2, F3), medium wave (MW) and long
wave (LW). You can memorise six radio stations in each band.
• Selecting a station
Give the Tune buttons I<< (16) or >>I (17) a short press, and the unit will automatically search for
the next station. If you press one of the TUNE button for two seconds, it switches to a manual search
for stations. The display shows MANUAL.
Now you can select and save the station by pressing the TUNE button. After a short waiting period,
the unit switches back into the automatic station-search mode.
• Preset stations
In each wave band up to six stations can be memorised and recalled using the station
buttons 1-6 (14).
• Pre-setting stations
1. Press the BND/LOU button (13) to select the frequency range.
2. Press the TUNE button I<< (16) or I>> (17) to select a station.
3. Keep one of the station buttons 1-6 (14) pressed for approx. 3 seconds. A signal sound confirms
the storage of the station.
• Recall preset station
1. Press the BND/LOU button (13) to select the frequency range.
2. Press the station button (14) to recall the preset station.
• Automatic memory system (AMS)
Keep the AMS/MP3 button (18) pressed until you hear a signal sound. The display shows SEARCH.
The station search stops for approx. 5 sec. at each found station. The number flashing in the display
shows the number of the station key where the corresponding station is to be stored.
The tuner automatically scans past stations with a weak reception.
• Scan of preset stations
Automatic scanning of the preset stations in the wave band.
1. Press the BND/LOU button (13) to select the frequency range.
2. Give the the AMS/MP3 button (18) a short press. Now all stations are played for some seconds.
When the desired station is reached, give the AMS/MP3 button (18) a short press.
GB 9
GB
