MD 41550 Autoradio BDA_GB_edit.FH11 Tue Feb 10 09:01:39 2004 Seite 5
C
M
Y
CM
MY
CY CMY
K
ISO Adapter plug
Caution!
Use the ISO adapter plug of the car radio to ensure a safe electrical connection.
Important notes!
Ensure that the pink backup cable is attached to the permanent plus pole (for the station memory).
After all connections have been made, press the RESET button (27).
Aerial relay cable
The yellow cable is supplied for a relay-controlled aerial.
The relay will automatically extend the aerial when the unit is switched on and retracts it when it is
switched off.
Caution:
Do not connect the yellow cable to the motor cable, this may damage the unit.
Stereo Cinch output
External units (e.g. amplifier) can be connected to these terminals (red and white chinch output).
GB 6
DETACHING AND ATTACHING THE OPERATING PANEL
1. Press the OPEN/CLOSE button (3) on the front panel. The front panel will flip down and you
can see the CD-compartment.
2. Move
the RELEASE button on the front panel to the left, and pull on the front panel to detach
it from the unit.
3. For safekeeping, always store the front panel in the supplied protective case immediately after
being removed.
TO RE-ATTACH THE FRONT PANEL
1. Place the front panel over the bracket and push it towards the unit, a 'click' sound should be
heard.
2. Note that if the front panel fails to lock in position properly, you probably didnt place the panel
at the correct angle.
RELEASE Button
