System menu
As soon as you select the
SYSTEM
menu using the
buttons
22
, the direct links for the
SLEEP TIMER,
AUTO TV OFF, SUBTITLE
and
AUDIO LANGUAGE
appear above for faster processing. You can use the
SLEEP TIMER
to programme the device to switch off automatically. You can set the time in 30-minute
increments (maximum 2 hours). As soon as the setting is made, the sleep timer countdown begins.
Select
OFF
to deactivate this function.
Conditional Access
Language
Privacy Settings
Parental
Date/Time
Sources
Accessibility
Netflix
More...
System
Menu option
Settings
CONDITIONAL
ACCESS
If you want to watch subscription channels, you must fi rst register with the channel
provider. Once you have registered, you will receive a Conditional Access Module (CI
module) and a special card from your provider. You will fi nd information about the settings
in the documentation supplied with the module.
Install the CI components on your television in the following way:
− Switch the television off and pull out the mains plug.
− First insert the CI module in the slot on the side of the Smart TV. Then insert the card.
Please note: only insert or remove the CI module after you have disconnected the
device from the power supply.
NOTICE!
Risk of damage!
The CI module or the television could be damaged if you attempt to insert the
CI module by force.
− The CI module must be inserted correctly: it cannot be inserted if it is the
wrong way round.
− Connect the television to the power supply, switch it on, and wait for a
moment until the card is recognised.
Additional setup steps may be required for some CI modules, which you can complete in
the
CONDITIONAL ACCESS
menu.
If no module is inserted, the message
NO COMMON INTERFACE MODULE DETECTED
appears on the screen.
The appearance and operation of the menu may vary depending on the module
used.
42
The menu system in detail
