Direct Library Code Entry
To enter Codes directly from Library Code Tables using the Setup button. When a valid
code is entered for a Mode, that Mode is reset to its Default Button Label screen and
any learned functions for that Mode are deleted i.e., the Mode is reset back to its
power-on default configuration.
1. Press and hold Setup button until the LED remains on (after approximately 2-3
seconds) and the display shows the Main Setup Screen.
2. Release
the
Setup
button.
3. Press and release MODE. The LED blinks off once.
4. Press and release the desired Mode button (DVD, VCR, SAT, etc.) on the rubber
keypad. The LED blinks off once.
5. Press and release CODE. The LED blinks off once.
6. Enter the 3 digit Code from the Library Code Tables using the LCD number buttons.
For a valid code, the LED blinks off after the last digit is entered. For an invalid
code, the LED flashes three times before going off. In both cases, the display
returns to the Main Setup Screen.
7. Press
QUIT.
33
27” Flat Panel LCD TV
User’s Manual
using the universal remote
1
3
5
7
