Medion MD 23061, Assembly Instructions Manual

Page: 15 / 39

Assembly
15
9 Attaching the monitor
Step 9.1: For 100×100 mm VESA bolt holes
9
10
15 13 14
20
3
1. For each monitor, use a Phillips-head screwdriver (not included) 20 to screw
in either 2 M4×12 mm bolts 14 or 2 M5×12 mm bolts 13 with washers 15
into the top two VESA bolt holes 10 . Do not screw the bolts all the way in.
2. Slide these 2 bolts into the 2 openings at the top of the VESA plate 3 .
3. Insert 2 more bolts with washers through the VESA plate into the bottom
2 VESA bolt holes and tighten them fully. Return to the top 2 bolts and
tighten fully as well.
Note: Increase the washers for the specifi c needs of your monitor, if necessary.
Step 9.2: For 75×75 mm VESA bolt holes
10
13 14
20
10
15
3
− For each monitor, insert either 4 M4×12 mm bolts 14 or 4 M5×12 mm bolts 13
with washers 15 through the VESA plate 3 into the VESA bolt 10 holes.
Use a Phillips-head screwdriver (not included) 20 to tighten all bolts fully.