Cleaning and storage
26
Manual control of the wiper robot
− By pressing the
;
;
and
buttons.
− The wiper robot can be recalled to its starting point by pressing the
button.
− Empty the dirty water tank after each cleaning and clean the appliance as
described in section “7. Cleaning and storage” on page 26.
Stopping the cleaning process prematurely
− Press the
C L E A N
button on the appliance or any cleaning mode button on the
remote control during cleaning to stop the cleaning process.
The appliance now enters sleep mode.
− To switch off the appliance, press the
C L E A N
button on the appliance again for
about 3 seconds until a signal tone sounds.
− Empty the dirty water tank after each cleaning and clean the appliance as
described in section “7. Cleaning and storage” on page 26.
Cleaning and storage
DANGER!
Risk of electric shock!
There is a risk of electric shock/short circuit due to live parts.
− Never immerse the wiper robot, charging station or mains
adapter in water or other liquids!
− Only clean the appliance and all accessories with a dry or
slightly damp cloth.
− Move the ON/OFF switch to the
O F F
position and
pull the
mains plug out of the socket before cleaning and maintenance
as well as before assembly or disassembly of the accessories.