62
Connect the loose end of the RGB LED strip to the connector plug of the control unit. The
round side of the connection of the control unit to the RGB LED strip must face upwards.
The labelling on the RGB LED strip must face upwards.
Remove the cable ties as required.
Secure the control unit by removing the protective paper from the adhesive strips on the
rear side and pressing down the control unit firmly at the desired installation position.
Make sure that the mains power adapter is accessible at all times.
Plug the mains power adapter into the power socket before switching on the product.
If the adhesive strip has been bonded to a surface for a long period of time, sticky
residue may remain on the surface on removal. If necessary, use an adhesive remov-
er. Test the adhesive remover on a small area before cleaning the rest of the surface.
Follow the manufacturer’s instructions.
8.
Switching product on/off
Press the On/Standby button to switch the product on and off.
9. Getting
started
The free MEDION Life+ app is intended as the user interface and contains detailed step-by-
step instructions for operating the product, as such only the basic setup is described in these
instructions. Please refer to the app for all other instructions.
93370 DE-EN-FR DS Content 5006 4322 final.indb 62
93370 DE-EN-FR DS Content 5006 4322 final.indb 62
22.11.2019 09:25:49
22.11.2019 09:25:49
