CAUTION!
Risk of injury!
Risk of injury due to unsuitable ambient conditions!
Check the wall's properties and select a safe location
for the installation.
Make sure you do not damage any live electricity cables or ot-
her wires or pipes in the wall.
To avoid any damage, use a circuit tester to check whether gas pipes, electricity
cables, or water pipes, are located in the wall before starting to drill.
Mark the drill holes with a pen and a spirit level (use the supplied spirit level if
you wish).
Use an 8-mm masonry drill bit to drill the holes in the wall to a depth of 65 mm.
Insert a (wall) plug
4
in each drill hole.
Secure the wall mount
1
using the hex socket screws
3
and washers
7
.
Place the plastic covers
11
onto the ends of the arms.
EN
9
