18 of 56
displays will briefly go out. This Powerline Adapter has
now generated a random, unique network key.
Press the
SECURITY/RESET
button again for
approx. 1 - 2 seconds.
The Power LED flashes in green.
Now press the
SECURITY/RESET
button on the
second
Powerline Adapter within two minutes.
The Power LED flashes in green.
When the
POWER
LED and also the
POWERLINE
LED
are permanently lit in green, the encryption process has
been successfully completed.
12. Integrating additional
adapters into the network
NOTE
For this process, it is helpful to plug all of the
adapters, which are to receive the new network
key, next to each other in a multiple socket
adapter.
Proceed as follows for each additional Powerline Adapter
that is to receive the new network key:
All of the Powerline Adapters to be configured are
connected and ready for operation. The
POWER
LED
lights up.
Connect the adapter that is to be used to extend
the network to a wall socket. The
POWER
LED
lights up.
90215 50047240 ECommerce EN DK content RC1.indb 18
90215 50047240 ECommerce EN DK content RC1.indb 18
25.06.2014 11:23:56
25.06.2014 11:23:56
