Medion LIFE P85023, Instruction Manual

Page: 65 / 140

66 of140
10.2. Select WLAN region

Select the region in which you are operating the Internet radio.
The device will then start searching for available WLAN networks (access points).
10.3. Establishing a connection to a network
Any networks found will be listed by their name (SSID). WLAN access points which
provide a connection over WPS are displayed with
[WPS]
.
Below these you will see the entries:
RESCAN
: start the search again
WIRED
: search for networks via Ethernet
MANUAL CONFIG
: enter the settings manually
Connection via LAN:

If you have connected a network cable that will be used for connection to the In-
ternet, then select the entry
WIRED
.
The Internet radio will then search for an Internet connection via Ethernet and will
establish the connection automatically. A successful or failed connection will be in-
dicated by a corresponding message.
Connection via WLAN:

Select the WLAN access point via which the Internet radio is to be connected
and press the dial to confirm.
If this is an unencrypted (open) WLAN access point, the Internet radio will establish
the connection automatically.

To connect via an encrypted network, please note the following sections.
10.4. WLAN connection via WPS
If a WLAN network has been selected that allows a connection via WPS, the WPS
menu appears. If you do not want to establish a connection via WPS, then select the
entry “
SKIP WPS
” here.
WPS button

Select the
PUSH BUTTON
option, in order to use the WPS function by
means of the WPS button on the router.

Then press the WPS button on the router and confirm the connection on the In-
ternet radio by pressing the dial (
OK
).
NOTE!
Please also refer to the instructions for the router.
The device will now establish a connection with the network. A successful connec-
tion will be indicated by a corresponding message.