8
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
Start-up
Inserting or changing the battery
The battery in the wireless pen is almost flat if the input is interrupted or the lines are
not being displayed properly. In this case, please replace the battery.
The pen does not have an On/Off switch. It switches on automatically when it approa-
ches the input surface and switches off when it moves away from the surface.
Open the battery compartment by unscrewing the cap
anticlockwise.
Where applicable, remove the used battery and in-
sert a new LR03/AAA battery. Take care to ensure that
the battery end marked "+" is pointing to the pen tip
and that the end marked "-" is against the rear contact
spring.
Screw the wireless pen cap back on.
Installing software
CAUTION!
Important files may be changed or overwritten when you are installing
programs or drivers. Before installation, make a backup of your data so
that you can access the original files later if problems occur after installing
the software.
You need the software supplied to manage and edit your records or to convert them to
a usable format.
However, you can also operate the graphics pad with a compatible program, e.g.
"Paint".
Disc contents:
Ulead PhotoImpact
Drawing program
Pen Pad Driver
Graphics pad driver
Free Notes / Office Ink
Tool for writing notes
Power Presenter RE II
Tool for editing presentations
First insert the disc supplied. The installation process starts automatically. Click on
Setup.exe.
Follow the instructions on the screen and install all the programs from the CD
which you require. Detailed help for using the software has been installed automa-
tically.
86635 EN ALDI AUS Content Final.indd 8
86635 EN ALDI AUS Content Final.indd 8
09.07.2012 15:44:55
09.07.2012 15:44:55
