Medion LIFE P69123, Instruction Manual

Page: 113 / 122

114 of 122
Using the headphones
7. Using the headphones

Switch on the audio device that is connected to
the transmitter.

Switch on the transmitter using the switch at
the rear of the device.

The LED flashes orange until a connection is
made to the headphones and then remains on
permanently.

Press the power button on the right earpiece.
The red operating LED underneath the power but-
ton lights up until radio contact is made with the
transmitter.
If no transmitter is in range, the LED goes out after
5 minutes and the headphones switch off.
As soon as the green LED lights up permanently,
a connection has been established and the audio
signal will be transmitted.

Set the volume to a low level.

Set the length of the headband so that the
headphones sit comfortably.

Put the headphones on.

Set the desired volume.

To connect the headphones directly to the
playback device, use the supplied 3.5 mm au-
dio cable.
84123 FR-NL-DE-EN eCommerce Content Final REV1 MSN50044905.indb 114 84123 FR-NL-DE-EN eCommerce Content Final REV1 MSN50044905.indb 114 05.02.2014 14:25:51 05.02.2014 14:25:51