92 of 96
7.6. Display
illumination
With the radio switched off, press the
button to adjust the brightness
of the display in two levels.
7.7. NAP
timer
If the NAP timer is set, the light alarm clock switches on automatically at a specific
time with the alarm sound.
Press the
button to get to the settings for the NAP timer.
Then press the
button repeatedly to set a time from
N10
to
N90
.
The light alarm clock activates automatically after the set time has elapsed with a
buzzer. This switches off automatically after 30 minutes. The wake-up light is not
activated when the NAP timer is set.
By pressing the
button again, you can call up the remaining time.
To switch off the NAP time, press the
button or press the
button
repeatedly to select the
OFF
setting.
8. Automatic
switch-off
With the SLEEP function, the device plays a radio station and turns off after a
preselected time between 15 and 90 minutes.
8.1. Activate the SLEEP function
Press the
button for 2 seconds to activate the sleep timer.
Press the
button repeatedly to set the desired time period (between
15 and 90 minutes).
The light alarm clock turns off automatically after the set time has elapsed. To stop
the function, press the
button repeatedly, to select the
OFF
setting or
press the
button.
9.
Radio
operation
Fully unwind the connected wire aerial for VHF (FM) reception.
9.1. Switching the radio on and off
Press the
button to switch on the radio.
Press the
button again to switch off the radio.
9.2. Volume
setting
You can use the
and
buttons to set the volume.
Summary of Contents for LIFE P66074
Page 96: ...09 2016...
