60
Use the
/
buttons to set the alarm volume. The higher the numerical value,
the louder the alarm.
Then press the
OK
button again to complete the setting.
The activated alarm is indicated by the alarm symbol
in the display.
9.5.2. Stopping the alarm
When the alarm sounds, you can stop it immediately by pressing
ON/OFF
on
the device or the remote control.
9.5.3. Activating/deactivating the alarm
Press and hold the
ON/OFF
button to switch off the device.
Press the
TIMER
button to display the alarm setting.
Press the
TIMER
button again to switch the alarm on or off.
If the alarm is active, the
symbol is displayed.
9.6. Sleep
timer
If you select the sleep timer function, the device switches off automatically after a
defined period of up to 90 minutes.
Press the
SLEEP
button once or several times and select the duration of the
sleep timer at 90, 60, 30 or 15 minute intervals or 00 (off ).
After the selected duration, the device switches itself off automatically.
If a sleep timer is activated, you can query the remaining time at any time:
Press
SLEEP
. The remaining time is shown.
If you wish to cancel the sleep timer, proceed as follows:
To switch off the sleep timer, press
SLEEP
until
SLEEP 00
appears on the dis-
play.
9.7. Dimmer
The display features four dimming phases.
Press the
DIMMER
button once or several times to run through the dimming
phases.
The display is switched off completely in the fourth dimming phase. However, if a
button is pressed, the display appears for a few seconds.
