14,85 * 21 cm
24.07.2009 14:24
Operation
13
UK
EN
ES
FR
IT
NL
Switching on the loudspeaker and transmitter
1.
Switch on the transmitter by
sliding the On/Off switch to
ON
.
The power light on the front will
light up green.
The device is now ready for
operation..
2.
Switch on your audio device, select a medium loud volume and start the
playback. The power light of the transmitter will change to blue. The transmitter
is switched on.
3.
Switch on the loudspeaker with
the On/Off switch . The power
light of the loudspeaker will light
up green.
Status of the power light
If the power lights light up
green
, the devices are ready for operation.
If the power lights light up
blue
, the devices are switched on and active.
Ready to operate
(green power light)
Active
(blue power light)
Transmitter
•
The audio device was
switched off
•
No audio signal for more
than 4 minutes because
playback is not switched
on
•
Loudspeaker does not
receive a signal for more
than 4 minutes because it
is not switched on or
there is no radio contact
•
Playback was started
Loudspeaker
•
The radio contact to the
transmitter was
interrupted
•
The radio contact to the
transmitter was re-established
On/off switch
ON/OFF
On/off switch
