12. Audio source selection
Select the required audio source (AUX, BT, HDMI ARC or Optical) by pressing
the
SOURCE
button on the sound bar or the
OPTICAL
,
AUX
,
BT
or
HDMI ARC
buttons on the remote control.
The operating mode selected in any given case is displayed by the coloured
LED indicators
6
:
Power light
Flashing
Permanently on
Red
Standby
Green
HDMI
AUX
Orange
Optical
Blue
Bluetooth
13. Volume setting
Use the VOL+/VOL- buttons on the sound bar or on the remote control to ad-
just the volume to the required level:
+
Increase volume
–
Reduce volume
The volume can be turned off completely by pressing the MUTE button on
the remote control.
Press the MUTE button again to restore the audio output.
14. Audio playback in AUX/Bluetooth mode
If you have connected the sound bar to a device which supports the A2DP
profile and AVRCP profile (Audio/Video Remote Control), the sound bar will
be used as an output medium and the audio signals will be emitted by the
sound bar only.
NOTE
If you have connected the sound bar to a Bluetooth-enabled
mobile telephone, the music playback will be interrupted if a call
comes in and resumed after the call has ended.
100 of 104
80022 DE-FR-NL-EN eCommerce Content RC1.indb 100
80022 DE-FR-NL-EN eCommerce Content RC1.indb 100
31.07.2015 08:49:24
31.07.2015 08:49:24
