22
6.5. Common Interface (CI)
If you want to watch subscription channels, you must first register with the relevant
provider. You will receive a Conditional Access Module (CAM module) and a special
card from your provider after registration. You will find information about the set-
tings in the documentation supplied with the module.
Install the CI components on your television in the following way:
First insert the CAM module in the slot on the side of the Full HD Caravan TV.
Then insert the card.
Connect the television to the power supply, switch it on, and wait for a moment
until the card is recognised.
Please note that you can only insert or remove the CI module when the
device is in STANDBY mode, or has been disconnected from the mains
power.
The CAM module must be inserted correctly: it cannot be inserted if it is
the wrong way round. The CAM module or the television could be dam-
aged if you attempt to insert the CAM module by force.
6.6. Connect the Power Supply Adaptor
Connect the 3.5 mm jack of the included power supply adaptor model SOY-
1200300B2 to the
POWER DC IN
connection of the device.
Plug the power cable of the powersupply adaptor into a 100 - 240 V - 50 Hz
mains socket
NOTICE!
RISK OF DAMAGE!
The use of different power supply adaptors may cause
damages to the device.
Please only use the included power supply adaptor.
6.7. Switching the Full HD Caravan TV on and off
Connect the power supply adaptor to the device and plug it to the mains. The
unit will switch to standby off mode when connected to the mains.
To switch on the unit either press the button
on the remote control or the
STANDBY
button of the unit.
Press the button
on the remote control or the
STANDBY
button of the unit to
switch the device over to standby mode again. The unit continues to consume
power in this mode.
Disconnect the power cord from the mains to switch it off completely.
If the device is not receiving an input signal, it will automatically switch
to standby mode after five minutes. A countdown timer will be displayed
on the screen until this time. This function is not available for all sources.