21 of 82
6. General Operating Instructions
6.1.
Switching
on/off the Device
Your device will be in its normal operating state after the initial set up. You can
activate and deactivate your device with the On-/Off switch.
To start your navigation system press briefly the On-/Off switch.
PLEASE NOTE!
Your device is delivered in a status in which it will not switch off
independently. You can adjust the period of operation to suit your needs
using the
Settings
button on the main screen of your device.
Your navigation system will use a low amount of electricity and the
batteries will be discharged, even when it is in the standby mode.
To switch off your navigation system briefly press the On-/Off switch .
The following screen will appear:
You have three possible choices:
Button
Description
Cancel/Back
Return to previous view with this key, if you have accidently called up
this screen.
Standby Mode (Energy saving mode)
The device will go into Standby Mode if this key
is clicked.
Reset
You can carry out a reset by clicking this key.
The device will go into the Standby mode automatically after a few seconds if you
do not want to select any of these three possibilities.
For further settings within the Standby mode also see the chapter on “21. Special
CleanUp Function”, page 64, point 8.
This display will also appear after the delay period of a few seconds has expired, if
you have activated the DC AutoSuspend Comfort Function.
E4x70 Generic EN Gopal 7.0 Final Content.indd 21
E4x70 Generic EN Gopal 7.0 Final Content.indd 21
12.12.2012 14:15:31
12.12.2012 14:15:31
