English
8
Connecting the Monitor
To start using the TFT monitor straight away, please read the "
Safety and Precautions
" section (page 2).
We recommend that you also read all the other sections as these contain detailed explanations and tips on how to
use your TFT display.
(Ill.: Rearside connectors)
•
Ensure that the TFT monitor is not yet connected to the line power (power cord not yet plugged in) and nei-
ther the TFT monitor nor the computer is switched on.
•
Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT.
n
Connecting Signal Cable
•
Plug the data cable into the matching VGA connections on the computer and the monitor. If your PC also
has a DVI output, you can connect your monitor by means of the DVI-D connector.
Note
Even if you computer offers multiple connections, connect only one cable to avoid problems with the
signal detection.
o
Connecting Audio Cable
•
Plug the audio cable into the matching sockets on the computer and the TFT monitor.
p
Connecting the Power Supply
•
Plug the power supply cable into the power supply socket of the TFT screen and plug the electric plug into a
socket close to the TFT screen (same circuit).
•
Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or off, on the
back. If the switch is set to
0
, then no power is consumed. Set the switch to
I
and next switch your monitor on
using the on/off switch. Then switch on your computer.
Power
supply
VGA
connector
Audio con-
nector
Power
switch
DVI-D
connector
