
25
8. Operating and Status LEDs
The system displays power supply status and operating modes via LEDs. The
operating lights also light up during notebook activity:
Operating Indicator
This indicator lights up when the system is powered on.
A
Capital Lock
This LED lights when CAPS-Lock has been activated. This sets the
keyboard to capital letters.
1
Num Lock
This LED lights when NUM-Lock has been activated.
9. Power Supply
9.1. On/Off Switch
`
Open the notebook and hold the on/off switch down briefly to switch the
notebook on or off.
If it is no longer possible to switch off the notebook via the software,
keep the On/Off switch pressed down for about 10 seconds.
Do not switch your notebook off while the HDD/SSD is being accessed.
Otherwise data may be lost. To protect the HDD/SSD, you should always
wait for 5 seconds after switching off the notebook before switching it
back on again.
10. Preparation for Starting-Up
To operate your notebook safety and ensure a long service life, you have to read the
“Operational Safety” chapter at the beginning of this manual. All operating software
is already fully preinstalled on the notebook so there is no need for you to install
any more drivers and you can get started right away.
`
Plug the power cord into the notebook and connect the AC adapter to an easily
accessible power outlet.
`
Open up the display to the desired position using your thumb and forefinger.
Always hold the display firmly by the middle when folding it back, adjusting the
position and closing it. Failure to do so may damage the display. Never use force
to open the display.
When first operating your notebook please ensure that the AC adapter
is connected.