33
NOTICE!
Risk of damage!
To avoid damaging the device, never allow the plug
contacts to come into contact with water.
`
If this nevertheless happens, it is essential that the
plug contacts are rubbed dry before using the device
again.
21.7. Storage when not in use
Store the all in one PC in a cool, dry place if you are not going to use it for an
extended period of time and make sure that it is protected from dust and extremes
of temperature.
`
Remove all media from the USB slots.
`
Remove all cables and connected peripheral devices.
22. Upgrading/Modifying and Repair
Upgrades and modifications to your All in one PC should only be carried out by
qualified specialists. If you do not have the necessary qualifications, have the work
carried out by a qualified service technician. Please contact your customer service
department if you have technical problems with your All in one PC.
If a repair must be carried out, please contact only our authorised service partners.
22.1. Notes for Service Technicians
`
Only service technicians may open up the all in one PC housing or upgrade or
modify your All in one PC.
`
Use only original replacement parts.
`
Before opening the housing, disconnect all power and connecting cables. If the
all in one PC is not disconnected from the power supply before being opened,
there is a risk that components could be damaged.
`
Internal components of the all in one PC may be damaged by electrostatic
discharge (ESD). Carry out repairs, as well as system enhancements or
modifications, at an ESD workplace. If such a workplace is not available, wear
an antistatic cuff or ensure you are touching an earthed, metallic object. We will
charge for any repairs to damage caused by incorrect handling.
`
Requirement for the m.2 2280 flash memory:
The E23401 model connection only supports m.2 2280 flash memory with PCIe /
NVMe connection.
