21
When first operating your All in one PC please ensure that the AC
adapter is connected.
`
Switch the all in one PC on by pressing the on/off switch. The all in one PC will
now start and run through various installation steps.
The operating system cannot be used unless you agree to the terms and conditions
of use during the installation process. Have the information ready for access to Wi-Fi
or your email inbox in case you wish to set this up now.
The operating system will be loaded from the the flash memory. The loading
process takes a little longer during the initial setup. Once all the necessary data has
been entered, the operating system will be set up. The operating system is fully
loaded once the Windows
®
start-up screen appears.
NOTICE!
Loss of data!
The initial installation may take a few minutes. Do
not unplug the all in one PC from the power source
or switch it off during the initial installation. This may
adversely affect the installation.
`
Do not switch off the all in one PC until after the
installation has been completed successfully and the
startup screen appears.
10.1. Starting the all in one PC
`
Open up the display as described above and press the on/off switch.
`
Follow the instructions on the screen. Step by step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
`
Select your desired language and then the corresponding country settings.
`
Connect to the Internet if you have a properly-equipped Internet connection.
If you choose to skip this point, you can connect to the Internet later via the
Windows
®
interface.
If you have already set up an Internet connection, you can now log in to your All in
one PC using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed
apps. If you log in on a local account, you can set up a Microsoft account later at any
time.
