E
E
N
NG
GLLIIS
SH
H
2
N
OTES FOR
S
ERVICE
E
NGINEERS
•
Before opening the housing,
disconnect the monitor from all power sources and remove any con-
necting cables
. If the monitor has not been disconnected from the power outlet before being opened,
there is a
danger to life
through electric shock. There is also a risk of damage to the components.
•
Internal components of the LCD monitor may be damaged by
electrostatic
discharge
(ESD). Carry out
system upgrades and changes in an
ESD-protected workshop
. If no such workshop is available, wear an
antistatic wrist strap
or touch a highly conductive metal object.
We can repair damage sustained by in-
appropriate handling for a fee.
•
Use only
original spare parts
.
P
OINT OF USE
•
Keep your LCD monitor and all units connected to it away from
moisture
and avoid
dust
,
heat
and
direct
sunlight
. Failure to observe these instructions can lead to malfunctions or damage to the
LCD monitor
.
•
Place and operate all units on
a stable, level
and
vibration-free surface
in order to avoid the
LCD monitor from falling.
•
Avoid dazzle, reflections, extreme light/dark contrast
in order to save your eyes and
ensure a pleasant, ergonometric work station.
•
Take
regulator breaks
when working with your LCD monitor in order to avoid tension and
fatigue.
E
NVIRONMENTAL CONDITIONS
•
The LCD monitor can be operated at an ambient temperatures of between
+41°F
and
+95°F
(5° C to 35° C) and at a relative humidity of between 10% and 80% (without condensation).
•
When switched off, the monitor can be stored at between
-4°F
and
+140°F
(-20° C - +60° C), up
to the maximum height of 39,000 ft (12,000 m) above sea level at a relative humidity of between
10% and 85% (without condensation).
•
After transporting your LCD monitor please wait until it has assumed the ambient temperature
before connecting and switching it on. Extremely high variations in the
temperature or hu-
midity
may result in condensation forming on the inside of the LCD monitor which could cause
an
electrical short-circuit.
